Sets, or removes, the selected replicator for an already configured virtual network.
| virtual-network | Designates changing the virtual overlay network configuration. |
| vn_name | Sets the alphanumeric string identifying the virtual network to be configured. |
| selected-replicator | Target to send broadcast and multicast traffic to perform replication when configured as leaf. |
| ipaddress | Designates configuring the IP address of a remote tunnel-endpoint to be used as replicator. |
| ipaddress | Sets the IPv4 address of the remote tunnel-endpoint configured as a replicator. |
| none | Removes an existing default selected replicator for this virtual network. |
N/A.
The following example configures the remote tunnel-endpoint at the IP address "10.1.1..100" as the selected replicator for the virtual network "vn-blue":
# configure virtual-network vn-blue selected-replicator 10.1.1.100
# configure virtual-network vn-blue selected-replicator none
This command was first available in ExtremeXOS 31.1.
This command is available on all Universal switches and stacks supported in this document.